Power windows

WARNING

To avoid serious personal injury caused by entrapment, always conform to the following instructions without exception.

• When operating the power windows, be extremely careful to prevent anyone’s fingers, arms, neck or head from being caught in the window.

• Always lock the passengers’ windows using the lock switch when children are riding in the vehicle.

• Before leaving the vehicle, always remove the key from the ignition switch for safety and never allow an unattended child to remain in the vehicle. Failure to follow this procedure could result in injury to a child operating the power window.

The power windows operate only when the ignition switch is in the “ON” position.

▲ Driver’s side switches

1) Lock switch
2) For driver’s window
3) For front passenger’s window 4) For rear left window
5) For rear right window

All door windows can be controlled by the power window switch cluster at the driver side door.

▲ Operating the driver’s window

To open:

Push the switch down lightly and hold it.

The window will open as long as the switch is held.

This switch also has a one-touch auto down feature that allows the window to be opened fully without holding the switch.

Push the switch down until it clicks and release it, and the window will fully open.

To stop the window halfway, pull the switch up lightly.

To close:

Pull the switch up lightly and hold it. The window will close as long as the switch is held.

▲ Operating the passengers’ windows

To open:

Push the appropriate switch down and hold it until the window reaches the desired position.

To close:

Pull the switch up and hold it until the window reaches the desired position.

▲ Locking the passengers’ windows

Push the lock switch. When the lock switch is in the “LOCK” position, the passengers’ windows cannot be opened or closed.

Press the switch again to cancel the passengers’ window locking.

NOTE

When the lock switch is pushed to the “LOCK” position, the indicator lights in the passenger’s window switches (included in the power window switch cluster on the driver’s door) all turn off.

▲ Passengers’ side switches

Front passenger’s window switch

1) Open
2) Close

Rear passengers’ window switches

1) Open
2) Close

To open:

Push the switch down and hold it until the window reaches the desired position.

To close:

Pull the switch up and hold it until the window reaches the desired position.

When the lock switch on the power window switch cluster, located on the driver’s side door, is in the “LOCK” position, the passengers’ windows cannot be operated with the passengers’ switches.