The power is switched every time the push-button ignition switch is pressed.

1. Carry the access key, and sit in the driver’s seat.

2. Shift the select lever into the “P” position.

3. Press the push-button ignition switch without depressing the brake pedal. Every time the button is pressed, the power is switched in the sequence of “OFF”, “ACC”, “ON” and “OFF”. When the engine is stopped and the push-button ignition switch is in “ACC” or “ON”, the operation indicator on the push-button ignition switch illuminates in orange.

CAUTION

● When the push-button ignition switch is left in “ON” or “ACC” for a long time, it may result in vehicle battery discharge.

● Do not spill drinks or other liquids on the push-button ignition switch. It may cause a malfunction.

● Do not touch the push-button ignition switch with a hand soiled with oil or other contaminants. It may cause a malfunction.

● If the push-button ignition switch does not operate smoothly, stop the operation. Contact a SUBARU dealer immediately.

● If the push-button ignition switch does not illuminate even when the instrument panel illumination is turned on, have the vehicle inspected at a SUBARU dealer.

● If the vehicle was left in the hot sun for a long time, the surface of the push-button ignition switch may get hot. Be careful not to burn yourself.

NOTE

● The push-button ignition switch cannot be switched to “OFF” when the select lever is in a position other than “P”.

● When operating the push-button ignition switch, firmly press it all the way.

● If the push-button ignition switch is pressed quickly, the power may not turn on or off.

● If the indicator light on the pushbutton ignition switch flashes in green when the push-button ignition switch is pressed, steering is locked. When this occurs, press the push-button ignition switch while turning the steering wheel left and right.

Battery drainage prevention function

When the push-button ignition switch is left in the “ACC” or “ON” position for approximately 1 hour, the push-button ignition switch will be automatically switched to “OFF” to prevent the battery from going dead. This function is activated when the select lever is in the “P” position.