Canceling the function for meter/gauge needle movement upon turning on the ignition switch
It is possible to activate or deactivate the movement of the meter needles and gauge needles that takes place when the ignition switch is turned to the “ON” position. To change the setting, perform the following procedure.
1. Turn the ignition switch to the “LOCK”/ “OFF” or “ACC” position.
2. Press the trip knob to show 
or
on the trip meter display.
The display can be switched as shown in the following sequence by pressing the trip knob.
NOTE
● Your vehicle’s initial movement setting of the meter/gauge needles has been set for activation “ ” at the time of shipment from the factory.
● It is not possible to change the initial movement setting of the meter/gauge needles when the ignition switch is in the “ON” position. Change the setting when the ignition switch is in the “LOCK”/“OFF” or “ACC” position.