Image quality and volume settings

The image quality and volume settings can be adjusted. To change the items, operate the switch. or
Preparation for image quality and switch.


Preparation for image quality and volume settings

1. Turn the ignition switch to the “ON” position.

2. Pull and hold the “toward you to show the selection screen. /SET” switch
toward you to show the selection screen.

3. After the selection screen is displayed,


3. After the selection screen is displayed, operate the switch to show the or
“Display” item. Then, pull the “ /SET” switch to show the
“Display” item. Then, pull the “ switch toward you./SET”
switch toward you.

Brightness setting

Perform the preparation steps according to “Preparation for image quality and volume settings” .

2. Operate the or


2. Operate the switch to or
select the “Brightness” item. Then pull the switch to
select the “Brightness” item. Then pull the “ /SET” switch toward you.


3. Select a brightness level by operating


3. Select a brightness level by operating theswitch, and confirm the or
setting by pulling the “ /SET” switch, and confirm the
setting by pulling the “ switch/SET”
switch toward you.

Contrast setting

1. Perform the preparation steps according to “Preparation for image quality and volume settings” .

2. Operate the or


2. Operate the switch to or
select the “Contrast” item. Then pull the switch to
select the “Contrast” item. Then pull the “ /SET” switch toward you.


3. Select a contrast level by operating the


3. Select a contrast level by operating the switch, and confirm the setting or
by pulling the “ /SET” switch switch, and confirm the setting
by pulling the “toward you. /SET” switch
toward you.

Screen OFF setting

1. Perform the preparation steps according to “Preparation for image quality and volume settings” .

2. Operate the or


2. Operate theswitch to or
select the “Screen OFF” item. Then pull switch to
select the “Screen OFF” item. Then pull the “ /SET” switch toward you.


3. Pull the “ /SET” switch once


3. Pull the “ more/SET” switch once
more toward you.

4. The screen is turned off.


4. The screen is turned off.

Restoring the screen

When the or “,
/SET” switch is or “
pulled toward you after the ignition switch/SET” switch is
pulled toward you after the ignition switch is turned to the “ON” position, the screen will be restored. The screen will be restored with the basic screen that was displayed when the screen was turned off.

While the screen is off, a warning message will be displayed if necessary, but other screens will not be displayed.

 Beep volume setting

1. Perform the preparation steps according to “Preparation for image quality and volume settings” .

2. Operate the or


2. Operate the switch to or
select the “Beep” item. Then pull the “switch to
select the “Beep” item. Then pull the “/
/ SET” switch toward you.

3. Pull the “ /SET” switch


3. Pull the “toward you. /SET” switch
toward you.

4. Select an item by operating the


4. Select an item by operating theor
or /SET” switch switch. Then pull the “/SET” switch
/SET” switch toward you.

5. Select “Set” by operating the


5. Select “Set” by operating the switch, and confirm the setting by pulling
switch, and confirm the setting by pulling the “ /SET” switch toward you.


6. The system will notify you that the


6. The system will notify you that the setting is complete.