The scan mode lets you listen to the first 10 seconds of each track in succession.

Press the “SCAN” button to start scanning upward beginning with the track following the currently selected one.

After all tracks on the disc/in the folder have been scanned, normal playback will be resumed. To cancel the scan mode, press the “SCAN” button again.

NOTE

● The scan mode will be cancelled if you perform any of the following steps.

– Press the “RPT” button.

– Press the “RDM” button.

– Turn the “TRACK” dial.

– Press the

or

side of the
“FOLDER” button (only when an MP3/WMA/AAC track is playing).

– Press the or
side of
the “TRACK/SEEK” button.

– Press the “SCAN” button (type A, C and D audio).

– Press the “SCAN/A.S” button (type B and E audio).

– Select the radio or AUX mode.

– Turn off the power of the audio equipment.

– Turn the ignition switch to the “LOCK”/“OFF” position.

● When the “SCAN” button (type A, C and D audio)/“SCAN/A.S” button (type B and E audio) is pressed while the MP3, WMA or AAC format data is played back, the system scans within the current folder.

● When the “SCAN” button (type A, C and D audio)/“SCAN/A.S” button (type B and E audio) is pressed while data (except for the MP3, WMA or AAC formats) is played back, the system scans the disc.