Vehicle Dynamics Control warning light/Vehicle Dynamics Control operation indicator light
Vehicle Dynamics Control warning light
CAUTION
The Vehicle Dynamics Control system
provides its ABS control
through the electrical circuit of the
ABS system. Accordingly, if the ABS
is inoperative, the Vehicle Dynamics
Control system becomes unable to provide ABS control. As a result, the
Vehicle Dynamics Control system
also becomes inoperative, causing
the warning light to illuminate.
Though both the Vehicle Dynamics Control and ABS systems are inoperative in this case, the ordinary functions of the brake system are still available. You will be safe while driving with this condition, but drive carefully and have your vehicle checked at a SUBARU dealer as soon as possible.
NOTE
● If the electrical circuit of the Vehicle
Dynamics Control system itself malfunctions,
the warning light only illuminates.
At this time, the ABS (Anti-lock Brake System) remains fully operational.
● The warning light illuminates when the electronic control system of the ABS/Vehicle Dynamics Control system malfunctions.
The Vehicle Dynamics Control system is probably inoperative under any of the following conditions. Have your vehicle checked at a SUBARU dealer immediately.
●
The warning light does not illuminate when the ignition switch is turned to the “ON” position.
●
The warning light illuminates while the vehicle is running.
NOTE
If the warning light behavior is as
described in the following examples,
the Vehicle Dynamics Control system
may be considered normal.
● The warning light illuminates when the ignition switch is turned to the “ON” position and turns off approximately 2 seconds after the engine has started.
● The warning light illuminates right after the engine is started but turns off immediately, remaining off.
● The warning light illuminates after the engine has started and turns off while the vehicle is subsequently being driven.
● The warning light illuminates during driving, but it turns off immediately and remains off.
● The warning light illuminates when the engine has stalled and continues to illuminate after the engine has been restarted. However, it will turn off once the vehicle starts moving.
Vehicle Dynamics Control operation
indicator light
The indicator light flashes during activation of the skid suppression function and during activation of the traction control function.
NOTE
● The light may remain illuminated for
a short period of time after the engine
has been started, especially in cold
weather. This does not indicate the
existence of a problem. The light
should turn off as soon as the engine
has warmed up.
● The indicator light illuminates when the engine has developed a problem and the CHECK ENGINE warning light/ malfunction indicator light is on.
The Vehicle Dynamics Control system is probably malfunctioning under the following condition. Have your vehicle checked at a SUBARU dealer as soon as possible.
●
The light does not turn off even after the lapse of several minutes (the engine has warmed up) after the engine has started.